It is a three range output current tester, 5μA~1mA; 1mA~5mA; 5mA~10mA. The accuracy for current and voltage on these channels is ±0.05% FS. It has 8 channels, each channel is working independently. It is perfect for coin cell testing and widely used in university, lab, manufacturer sampling making.
It is a three range output current tester, 5μA~1mA; 1mA~5mA; 5mA~10mA. The accuracy for current and voltage on these channels is ±0.05% FS. It has 8 channels, each channel is working independently. It is perfect for coin cell testing and widely used in university, lab, manufacturer sampling making.
Key Features
Technical Parameters
Input Power |
AC220V ±10% / 50Hz |
|
Resolution |
AD: 24bitï¼›DA:16bit |
|
Input Resistance |
≥1GΩ |
|
Input Power |
25W |
|
Channel Features |
Constant Current Source and Constant Voltage Source with Independent pairs of Closed-loop Structure |
|
Channel Control Mode |
Independent Control |
|
Voltage |
Per Channel Control Voltage Range |
25mV~5V |
Minimum discharge voltage |
-5V |
|
Accuracy |
± 0.05% of FS |
|
Stability |
± 0.05% of FS |
|
Current |
Per Channel Current Range |
Range 1: 5μA~1mA, Range 2: 1mA~5mA, Range 3: 5mA~10mA |
Constant current cut-off current |
Range 1: 2μA; Range 2: 0.01mA ; Range 3: 0.02mA |
|
Accuracy |
± 0.05% of FS |
|
Stability |
± 0.05% of FS |
|
Power |
Per Channel Output Power |
0.05W |
Stability |
± 0.1% of FS |
|
Time |
Current Response Time |
< 500μs |
Step Time Range |
≤(365*24 )hour/step, Time Form Support 00：00：00.000(hã€minã€sã€ms) |
|
Data Recording |
Record Condition |
Timeâ–³t: 100ms |
Voltageâ–³U: 10mV |
||
Currentâ–³I: Range 1: 2μA; Range 2: 0.01mA , Range 3: 0.02mA |
||
Record Frequency |
10Hz |
|
Charge |
Charge Mode |
Constant Current Charge, Constant Voltage Charge, Constant Current and Constant Voltage Charge, Constant Power Charge |
End Conditon |
Voltage, Current, Relative Time, Capacity, -â–³V |
|
Discharge |
Discharge Mode |
Constant Current Discharge, Constant Voltage Discharge, Constant Current and Constant Voltage Discharge, Constant Power Discharge, Constant Resistance Discharge |
End Condition |
Voltage, Current, Relative Time, Capacity, -â–³V |
|
Pulse Test |
Charge |
Constant Current Charge, Constant Power Charge |
Discharge |
Constant Current Discharge, Constant Power Discharge |
|
Minimum Pulse Width |
500ms |
|
Pulse Number |
32 diffirent pulse for a single step |
|
Charge And Discharge Switch |
continuous switched for a single pulse step |
|
End Condition |
Voltage, Relative Time |
|
DCIR test supported |
||
Cycle |
Loop Measure Range |
1~65535 times |
Max Steps Per Loop |
254 |
|
Nested Loop |
Nested loop Function, Max Support 3 Layers |
|
Protection |
Power-down Data Protection |
|
Off-line Testing Function |
||
Setting Protection Condition, Setting Parameter: Low Voltage limit, Upper Voltage limit, Low Current limit, Upper Current limit, Delay Time |
||
Voltage and Current Testing Sample |
4-wire connecting |
|
Noise |
<45dB |
|
Database |
MySQL Database |
|
A Means of Communication of Upper Machine |
TCP/IP Protocol |
|
Data Output |
EXCEL 2003, 2010, TXT |
|
Server disk configuration |
500GB |
|
Communication Interface |
Internet Access |
|
Server Operating System |
Windows 7 |
|
Leak current |
0.005μA |
|
Per Unit Main Channels No. |
8 |
|
Clamp |
Coin cell clamp |
|
Dimension |
L483 * W310 * H48mm |
|
