5V6A-S1 is a three range output current tester , 0.5mA ~ 0.1A, 0.1A ~ 3A, 3A ~6A.The accuracy for current and voltage on these channels is ±0.05% FS.It has 80 channels, each channel is working independently. The flexibility of the STC-40080-5V6A allows it to be used for a wide range of applications such as materials research, quality control in manufacturing, research & development, battery and cell testing, Super-capacitor testing, etc.
5V6A-S1 is a three range output current tester , 0.5mA ~ 0.1A, 0.1A ~ 3A, 3A ~6A.The accuracy for current and voltage on these channels is ±0.05% FS.It has 80 channels, each channel is working independently. The flexibility of the STC-40080-5V6A allows it to be used for a wide range of applications such as materials research, quality control in manufacturing, research & development, battery and cell testing, Super-capacitor testing, etc.
Key Features
â— Multi ranges.
â— Wide application.
â— High accuracy, ±0.05% FS.
â— Fast response time.
â— Each channel is independent.
â— Side air intake on the left / right side & eight test channels,the inventive heat-radiating system is practical and feasible and can increase heat-radiating efficiency and space utilizaion rate.
Technical Parameters
Input Power |
AC 220V ±10% / 50Hz |
|
Resolution |
AD: 24bit; DA: 16bit |
|
Input Resistance |
≥1GΩ |
|
Input Power |
425W |
|
Channel Features |
Constant Current Source and Constant Voltage Source with independent pairs of Closed-loop Structure |
|
Channel Control Mode |
Independent Control |
|
Voltage |
Per Channel Control Voltage Range |
25mV~5V |
Minimum discharge voltage |
Upper and lower clamp discharge to 1V, 2m cables to 1.5V |
|
Accuracy |
± 0.05% of FS |
|
Stability |
± 0.05% of FS |
|
Current |
Per Channel Current Range |
Range 1: 0.5mA~0.1A, Range 2: 0.1A~3A, Range 3: 3A~6A |
Constant current cut-off current |
Range 1: 0.2mA; Range 2: 6mA; Range 3: 12mA |
|
Accuracy |
± 0.05% of FS |
|
Stability |
± 0.05% of FS |
|
Power |
Per Channel Output Power |
30W |
Stability |
± 0.1% of FS |
|
Time |
Current Response Time |
<1ms |
Step Time Range |
≤(365*24 )hour/step, Time Form Support 00：00：00.000(hã€minã€sã€ms) |
|
Data Recording |
Record Condition |
Timeâ–³t: 100ms |
Voltageâ–³U: 10mV |
||
Currentâ–³I: Range 1: 2mA; Range 2: 6mA ; Range 3: 12mA |
||
Record Frequency |
10Hz |
|
Charge |
Charge Mode |
Constant Current Charge, Constant Voltage Charge, Constant Current and Constant Voltage Charge, Constant Power Charge |
End Conditon |
Voltage, Current, Relative Time, Capacity, -â–³V |
|
Discharge |
Discharge Mode |
Constant Current Discharge, Constant Voltage Discharge, Constant Current and Constant Voltage Discharge, Constant Power Discharge, Constant Resistance Discharge |
End Condition |
Voltage, Current, Relative Time, Capacity, -â–³V |
|
Pulse Test |
Charge |
Constant Current Charge, Constant Power Charge |
Discharge |
Constant Current Discharge, Constant Power Discharge |
|
Minimum Pulse Width |
500ms |
|
Pulse Number |
32 diffirent pulse for a single step |
|
Charge And Discharge Switch |
continuous switched for a single pulse step |
|
End Condition |
Voltage, Relative Time |
|
DCIR test supported |
||
Cycle |
Loop Measure Range |
1~65535 times |
Max Steps Per Loop |
254 |
|
Nested Loop |
Nested loop Function，Max Support 3 Layers |
|
Protection |
Power-down Data Protection |
|
Off-line Testing Function |
||
Setting Protection Condition, Setting Parameter: Low Voltage limit, Upper Voltage limit, Low Current limit, Upper Current limit, Delay Time , Anti-reverse Protection Model |
||
Voltage and Current Testing Sample |
4-wire connecting |
|
Noise |
<55dB |
|
Database |
MySQL Database |
|
A Means of Communication of Upper Machine |
TCP/IP Protocol |
|
Data Output |
EXCEL 2003, 2010, TXT |
|
Server disk configuration |
500GB |
|
Communication Interface |
Internet Access |
|
Server Operating System |
Windows 7 |
|
Leak current |
<5μA |
|
Per Unit Main Channels Qty |
80 |
|
Clamp |
Alligator clamp, Polymer clamp, Ring clamp optional |
|
Dimension |
L483 * W404 * H1300mm |
|
