5V10mA-S1 is a three range output current tester, 5μA~1mA; 1mA~5mA; 5mA~10mA. The accuracy for current and voltage on these channels is ±0.05% FS. It has 8 channels, each channel is working independently. It is perfect for coin cell testing and widely used in university, lab, manufacturer sampling making.
5V10mA-S1 is a three range output current tester, 5μA~1mA; 1mA~5mA; 5mA~10mA. The accuracy for current and voltage on these channels is ±0.05% FS. It has 8 channels, each channel is working independently. It is perfect for coin cell testing and widely used in university, lab, manufacturer sampling making.
Key Features
â— Multi ranges.
â— Wide application.
â— High accuracy, ±0.05% FS.
â— Fast response time.
â— Each channel is independent.
Technical Parameters
Input Power |
AC220V ±10% / 50Hz |
|
Resolution |
AD:26bitï¼›DA:16bit |
|
Input Resistance |
≥1GΩ |
|
Input Power |
25W |
|
Channel Features |
Constant Current Source and Constant Voltage Source with Independent pairs of Closed-loop Structure |
|
Channel Control Mode |
Independent Control |
|
Voltage |
Per Channel Control Voltage Range |
25mV~5V |
Minimum discharge voltage |
-5V |
|
Accuracy |
± 0.05% of FS |
|
Stability |
± 0.05% of FS |
|
Current |
Per Channel Current Range |
Range 1: 5μA~1mA, Range 2: 1mA~5mA, Range 3: 5mA~10mA |
Constant current cut-off current |
Range 1: 2μA; Range 2: 0.01mA ; Range 3: 0.02mA |
|
Accuracy |
± 0.05% of FS |
|
Stability |
± 0.05% of FS |
|
Power |
Per Channel Output Power |
0.05W |
Stability |
± 0.1% of FS |
|
Time |
Current Response Time |
< 500μs |
Step Time Range |
≤(365*24 )hour/step, Time Form Support 00：00：00.000(hã€minã€sã€ms) |
|
Data Recording |
Record Condition |
Timeâ–³t: 100ms |
Voltageâ–³U: 10mV |
||
Currentâ–³I: Range 1: 2μA; Range 2: 0.01mA , Range 3: 0.02mA |
||
Record Frequency |
10Hz |
|
Charge |
Charge Mode |
Constant Current Charge, Constant Voltage Charge, Constant Current and Constant Voltage Charge, Constant Power Charge |
End Conditon |
Voltage, Current, Relative Time, Capacity, -â–³V |
|
Discharge |
Discharge Mode |
Constant Current Dischargeã€Constant Voltage Dischargeã€Constant Current and Constant Voltage Dischargeã€Constant Power Dischargeã€Constant Resistance Discharge |
End Condition |
Voltage, Current, Relative Time, Capacity, -â–³V |
|
Pulse Test |
Charge |
Constant Current Charge, Constant Power Charge |
Discharge |
Constant Current Discharge, Constant Power Discharge |
|
Minimum Pulse Width |
500ms |
|
Pulse Number |
32 diffirent pulse for a single step |
|
Charge And Discharge Switch |
continuous switched for a single pulse step |
|
End Condition |
Voltageã€Relative Time |
|
DCIR test supported |
||
Cycle |
Loop Measure Range |
1~65535 times |
Max Steps Per Loop |
254 |
|
Nested Loop |
Nested loop Function，Max Support 3 Layers |
|
Protection |
Power-down Data Protection |
|
Off-line Testing Function |
||
Setting Protection Condition, Setting Parameter: Low Voltage limit, Upper Voltage limit, Low Current limit, Upper Current limit, Delay Time |
||
Voltage and Current Testing Sample |
4-wire connecting |
|
Noise |
<45dB |
|
Database |
MySQL Database |
|
A Means of Communication of Upper Machine |
TCP/IP Protocol |
|
Data Output |
EXCEL 2003, 2010, TXT |
|
Server disk configuration |
500GB |
|
Communication Interface |
Internet Access |
|
Server Operating System |
Windows 7 |
|
Leak current |
0.005μA |
|
Per Unit Main Channels No. |
8 |
|
Clamp |
Coin cell clamp |
|
Dimension |
L483 * W310 * H48mm |
|
